Installing The I/O Shield - Intel BOXD5400XS Product Manual

Installing and Replacing Desktop Board Components

Installing the I/O Shield

The Desktop Board comes with an I/O shield. When installed in the chassis, the shield
blocks radio frequency transmissions, protects internal components from dust and
foreign objects, and promotes correct airflow within the chassis.
NOTE
Desktop Board D5400XS requires a chassis that meets the SSI/EATX Chassis
specification (see http://ssiforum.oaktree.com/pdfs/SSI%20EEB%20v3-61.pdf). For a
list of recommended chassis and power supplies for this Desktop Board, refer to the
Intel Desktop Board D5400XS page at
http://support.intel.com/support/motherboards/desktop/.
Install the I/O shield before installing the Desktop Board in the chassis. Place the
shield inside the chassis as shown in Figure 7. Press the shield into place so that it fits
tightly and securely. If the shield does not fit, obtain a properly sized shield from the
chassis supplier.
Figure 7. Installing the I/O Shield
31