Use Of The Mount Accessories - Nextar W3-01 Manual

Use of the Mount
Accessories
When using the unit in vehicle, you can use the supplied mount accessories (mount
bracket, mount cradle and dashboard mount disk) to mount the unit in the vehicle. Take
the following steps to operate:
1. To mount the bracket to the vehicle:
To mount to windshield:
1)
2)
3)
To mount to dashboard, you can use the included adhesive disk:
1)
2)
3)
4)
2. To mount the unit to the bracket and cradle:
1. See Fig. 1 to slide the mount cradle onto the end of the mount bracket.
2. See Fig. 2. According to the arrow 1 to set the bottom edge of the unit onto the
mount cradle. Then push the tap at the top of the mount cradle in arrow 2 direction
to mount the unit to the mount cradle. To remove the unit, push the tap at the top of
the mount cradle in arrow 2 opposite direction.
Lift the suction cup lever.
Press the suction cup to the windshield.
Press down the suction cup lever.
Choose a clean, dry spot on your dashboard
Peel off protection liner from the back of the disk.
Attach the disk to your dashboard.
You can according to the steps to mount to windshield to mount the
bracket to the adhesive disk
18