System Settings - Sony STR-DA2800ES Operating Instructions Manual

x Off
Lets you turn off output of 12V triggers even
when the main receiver is turned on.
x Ctrl
Lets you turn the output of 12V triggers on or
off manually using the control command of an
external control device.
x Zone
Lets you turn the output of 12V triggers on or
off based on whether the selected zone is
turned on or off.
x Input (for "Main" only)
Lets you turn on the output of 12V triggers
when the preset input is selected.
When you select "Input," the setting display
which sets each input trigger to on/off appears.
Press V/v to select the input, then press
check the box.
x HDMI A (for "Main" only)
Lets you turn the output of 12V triggers on or
off based on the output setting of the HDMI
OUT A jack.
x HDMI B (for "Main" only)
Lets you turn the output of 12V triggers on or
off based on the output setting of the HDMI
OUT B jack.
x Main (for "Zone2" only)
Lets you link operation of trigger in zone 2 to
the TRIGGER OUT MAIN jack.
110
US

System Settings

You can customize the settings of the receiver.
Language
Lets you select the language for the messages
on the screen.
x English
x Español
x Français
x Deutsch
to
Auto Standby
Lets you turn the function that switches the
main zone to standby mode automatically if
you do not operate the receiver for a specific
period of time or when there is no signal input
to the receiver on or off.
x Off
Does not switch to standby mode.
x On
Switches to standby mode after approximately
30 minutes.
Note
• This function does not work in the following cases.
– When you play back via a USB device, an iPod/
iPhone, a home network, or Internet video.
– When the receiver is in the sleep mode.
Settings Lock
Lets you lock the settings of the receiver.
x On
You can only turn this function on using the
setting menu. When you turn this function off,
perform the following procedure.