Table of Contents
Advertisement
Figure 64. Removing the internal speaker
7. Remove the thermal sensor cable latched on the bottom of the old internal speaker and install it on the
new internal speaker.
8. Align the four tabs on the bottom of the new internal speaker with the corresponding holes in the
chassis, and push the new internal speaker straight down until it snaps into position.
Note: Carefully place the thermal sensor cable so that it will not impede installing the new internal
speaker.
.
Chapter 9
Replacing FRUs (Machine Types: 3379, 4083, 4088, 4099, 4138, 5897, 6137, 6234, 6258, 6303, 7174, 7220,
7346, 7354, 7357, 7360, 7483, 7582, 7627, 7630, 7638, 8910, and 9964.)
125
Hide quick links:
Advertisement
Table of Contents
