Chapter 3 - Configuration
DHCP
DHCP stands for Dynamic Host Control Protocol. The Vonage VWR Device has a
built-in DHCP server. The DHCP Server will automatically assign an IP address to the
computers on the LAN/private network. Be sure to set your computers to be DHCP
clients by setting their TCP/IP settings to "Obtain an IP Address Automatically." When you
turn your computers on, they will automatically load the proper TCP/IP settings provided
by the Vonage VWR Device. The DHCP Server will automatically allocate an unused
IP address from the IP address pool to the requesting computer. You must specify the
starting and ending address of the IP address pool.
D-Link VWR User Manual
12