Switch Configuration Screen - Cabletron Systems MMAC-Plus 9T125-08 Reference Manual

Switch Configuration Screen
The Switch Configuration Screen (Figure 2), provides basic setup options for
making a switch operational in your network.
Module Name: 9T125-08
Slot Number: 10
Bridge Address: 00-00-1D-2E-02-5C
Bridge Priority Label (hex):
Bridge Path Cost
Interface
1 (FNB)
2 (TR1)
3 (TR2)
SAVE
To modify a non-toggle field on this screen, use the arrow keys to highlight the
NOTE
field, then press the Enter key. Now you can modify the field.
SmartSwitch 9000
Switch Configuration
(hex): 0000000A
MAC/Local Address Ring
Speed
00-00-B8-74-40-BA 100
00-00-B8-74-40-7A [16]
00-00-B8-74-40-FA [16]
SRT CONFIGURATION
Figure 2. Switch Configuration Screen
9T125-08 Module Specific Information
Local Management
Firmware Revision: 01_00_00
BOOTPROM Revision: 01.00.05
Bridging Interfaces: 3
8000 Type of STA:
Novell Xlat:
Bridge Status
State
forwarding [ENABLED]
forwarding [ENABLED]
forwarding [ENABLED]
[IEEE]
[NONE]
EXIT RETURN
7