1. Manuals
  2. Brands
  3. Cabletron Systems Manuals
  4. Switch
  5. MMAC-Plus 9T125-08
  6. Reference manual

Cabletron Systems MMAC-Plus 9T125-08 Reference Manual

Local management appendix token ring microlan switch module
Hide thumbs Also See for MMAC-Plus 9T125-08:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
SmartSwitch 9000
9T125-08
Local Management Appendix
9032052-02

Advertisement

Table of Contents
loading

Related Manuals for Cabletron Systems MMAC-Plus 9T125-08

Summary of Contents for Cabletron Systems MMAC-Plus 9T125-08

  • Page 1 SmartSwitch 9000 9T125-08 Local Management Appendix 9032052-02...

  • Page 3: Module Interfaces

    Appendix 9T125-08 Module Specific Information Introduction This appendix contains local management information that is specific to the 9T125-08 Token Ring MicroLAN Switch Module. Module Interfaces The 9T125-08 Token Ring MicroLAN Switch Module has five interfaces. Table 1 lists the identifying number, name, and description of each interface. Table 1.
  • Page 4 9T125-08 Module Specific Information FNB Resource Configuration Codes The 9T125-08 Module provides connectivity between one of three interfaces: the front panel Token Ring interface(s) and the FDDI rings on the backplane (FNB-1 or FNB-2). The FNB Resource Configuration Screen allows you to connect the module’s front panel Token Ring interface to one of the chassis’...

  • Page 5: General Configuration Screen

    9T125-08 Module Specific Information General Configuration Screen The General Configuration Screen (Figure 1), displays various information about the selected module and allows you to set the following general parameters: • Date and Time • Screen Update Time • Screen Lockout Time •...

  • Page 6: General Configuration Screen Fields

    9T125-08 Module Specific Information General Configuration Screen Fields The following information briefly explains each General Configuration Screen field. Module Serial # Displays the serial number of the selected module. Module Board Revision Displays the version number of the selected module. FLASH Memory Displays the amount (megabytes) of flash memory in the selected module.
  • Page 7 9T125-08 Module Specific Information Screen Lockout Time Contains the maximum number of minutes that the Local Management application will display a module’s screen while pending input or action from a user. For example, if you enter 5 in this field, users will have up to five minutes to respond in some fashion to each of the specified module’s Local Management screens.
  • Page 8 9T125-08 Module Specific Information Default Interface (Toggle) Contains the number that represents the interface that is connected to the module’s Default Gateway. In some instances, dissimilar modules have different corresponding interface numbers. For example, if you are assigning a default interface to a 9E133-36 module and you enter a 3, then the default interface is the Flexible Network Bus.

  • Page 9: Switch Configuration Screen

    9T125-08 Module Specific Information Switch Configuration Screen The Switch Configuration Screen (Figure 2), provides basic setup options for making a switch operational in your network. SmartSwitch 9000 Local Management Switch Configuration Module Name: 9T125-08 Firmware Revision: 01_00_00 Slot Number: 10 BOOTPROM Revision: 01.00.05 Bridge Address: 00-00-1D-2E-02-5C Bridging Interfaces: 3...

  • Page 10: Switch Configuration Screen Fields

    9T125-08 Module Specific Information Switch Configuration Screen Fields The following information briefly explains each Switch Configuration Screen field. Bridge Address Displays the MAC Address of the bridge. Bridge Priority Label Allows you to enter a hexadecimal number that identifies the write-able portion of the Bridge ID, i.e., the first two octets of the Bridge ID.
  • Page 11 9T125-08 Module Specific Information MAC/Local Address Lists the hardware address of each listed bridge interface. Ring Speed (Toggle) Allows you to set each token ring interface’s operating speed (either 4 Mbps or 16 Mbps). Press the Space Bar to toggle to the desired value. Bridge State Displays the current state of each listed interface.
  • Page 12 9T125-08 Module Specific Information SRT Configuration Screen The SRT Configuration Screen (Figure 3), provides basic setup options for making a switch operational in your network. SmartSwitch 9000 Local Management SRT Configuration Module Name: 9T125-08 Firmware Revision: 01_00_00 Slot Number: 10 BOOTPROM Revision: 01.00.05 Bridge Number (hex): 1 Interface Ring...
  • Page 13 9T125-08 Module Specific Information SRT Configuration Screen Fields The following information briefly explains each SRT Configuration Screen field. Bridge Number Allows you to enter a hexadecimal number that uniquely identifies a bridge when more than one bridge is used to span the same two segments. Valid bridge numbers range from 01 to 0F (15).
  • Page 14 9T125-08 Module Specific Information Table 3. Bridge Methods and Explorer Type Choices Bridge Method Explorer Type Choices TP - Frames that are destined for an unknown destination address (not in bridge database) or a broadcast destination address are forwarded on to the Token Ring(s) as TP frames. No translation for source routing is performed.
  • Page 15 9T125-08 Module Specific Information Saving SRT Configuration Choices To save your modifications of the values on the SRT Configuration Screen: 1. Use the arrow keys to highlight SAVE at the bottom of the screen, then press the Return key. 2. When the message “SAVED OK” appears, the edits you have made are saved. If you exit without saving, the message “NOT SAVED -- PRESS SAVE TO KEEP CHANGES”...
  • Page 16 9T125-08 Module Specific Information Token Ring Port Configuration The Token Ring Port Configuration Screen (Figure 4), allows you to view the current operational and administrative status of the module’s ports. This screen also allows you to change the administrative status of each port (turn each port on or off).
  • Page 17 9T125-08 Module Specific Information Token Ring Port Configuration Screen Fields The following information briefly explains each Token Ring Port Configuration Screen field. Ring # Displays the current status/settings of the module ports that are attached to each token ring. The information that appears, and whether that information is modifiable, varies according to the configuration mode you select.
  • Page 18 9T125-08 Module Specific Information Token Ring Port Configuration Screen - Administrative Mode The Token Ring Port Configuration Screen (Administrative Mode) (Figure 5), allows you to turn a module’s ports ON (administratively enable) or OFF (administratively disable). You can turn ports ON/OFF individually or all on the token ring.
  • Page 19 9T125-08 Module Specific Information Configuring Administratively an Individual Port To administratively configure an individual port: 1. Use the arrow keys to highlight the value in the field of the port that you want to configure. Press the Space Bar until the desired value appears in the field (either ON or OFF).
  • Page 20 9T125-08 Module Specific Information Token Ring Port Configuration Screen - Operational Mode The Port Configuration Screen (Operational Mode) (Figure 6), displays the current status of each port in the module’s token ring. The status value that appears in a port’s field is determined by the type of port (Lobe or RI/RO), and its administrative status (On/Off).
  • Page 21 9T125-08 Module Specific Information Table 4. Token Ring Port Operational Codes And if the port is If the port is a... administratively Then, the operational status is: turned... ACT (Active) Ring Port The port is on and is passing data to the ring. RI (ring-in) or RO (ring-out) WRP (Wrapped)
  • Page 22 9T125-08 Module Specific Information Token Ring Secured Station Configuration The Token Ring Secured Station Configuration Screen (Figure 7), allows you to control access to the module’s token ring network. The Disabled mode (by default) allows all new stations to enter the ring. When ring security is enabled in Alarm Only mode, the module stores the MAC address of each station on the token ring network in a secure database or “allowed list.”...
  • Page 23 9T125-08 Module Specific Information SmartSwitch 9000 Local Management Token Ring Secured Station Configuration Module Name: 9T125-08 Firmware Revision: 01_00_00 Slot Number: 10 BOOTPROM Revision: 01.00.05 Token Ring #1 Entry Station Address 00-00-B8-74-40-06 00-00-B8-74-40-7A Stn Edit 00-00-00-00-00-00 [ ADD ] Security Mode [ Disabled [TOKEN RING 1] 9-16 ]...
  • Page 24 9T125-08 Module Specific Information Token Ring Secured Station Configuration Screen Fields The following information briefly explains each Token Ring Secured Station Configuration Screen field. Station Address Lists the MAC address of each station on the security “allowed” list. Up to 250 MAC addresses can appear in the list.
  • Page 25 9T125-08 Module Specific Information 4. Press the Space Bar until the command toggles to display DEL. 5. Press the Return key. The station appears in the Station Address list. Security Mode (Toggle) Allows you to set one of three security modes for the module’s token ring. Make sure you understand the consequences of changing security modes.
  • Page 26 9T125-08 Module Specific Information Selecting a Security Mode To select a Security Mode: 1. Use the arrow keys to highlight the Security Mode field. 2. Press the Space Bar to toggle to the desired security mode (either Disabled, Alarm Only, or Remove/Alarm). 3.

  • Page 27: Switch Statistics Screen

    9T125-08 Module Specific Information Switch Statistics Screen The Switch Statistics (TOTAL) Screen (Figure 8), displays the module’s transparent bridge and source route bridge statistics. The statistics are categorized as follows: • Transparent Unicast • Transparent Broadcast • Source Route Unicast (Not applicable on the FNB option) •...

  • Page 28: Switch Statistics Screen Fields

    9T125-08 Module Specific Information Switch Statistics Screen Fields The following information briefly explains each Switch Statistics Screen field. FDDI Interface Identifies the interface type as either FDDI Interface, TOKEN RING Interface #1, or TOKEN RING Interface #2. System Up Time Indicates how long the module has been up and running.
  • Page 29 9T125-08 Module Specific Information Switch Statistics Screen Commands TOTAL / ACCUMULATE / DELTA (Toggle) Allows you to: • Display a running TOTAL of statistics (statistics since the module was inserted into the chassis). • Reset the statistics to zero and then ACCUMULATE and display figures from that point in time forward.
  • Page 30 9T125-08 Module Specific Information CLEAR A command that only appears when you select ACCUMULATE as a statistic reporting method. The CLEAR command allows you to manually reset the screen’s statistics to zero and then start to accumulate statistics from that point in time.

  • Page 31: Error Statistics

    9T125-08 Module Specific Information Token Ring LAN Statistics The Token Ring LAN Statistics (TOTAL) Screen (Figure 9), displays the module’s error statistics. SmartSwitch 9000 Local Management Token Ring LAN Statistics (TOTAL) Module Name: 9T125-08 Firmware Revision: 01_00_00 Slot Number: 10 BOOTPROM Revision: 01.00.05 System Up Time: 000 + 00:33:36 Ring Number:...
  • Page 32 9T125-08 Module Specific Information Token Ring LAN Statistics Screen Fields The following information briefly explains each Token Ring LAN Statistics Screen field. System Up Time Indicates how long the module has been up and running. 000 + 00:00:00 Seconds Minutes Hours Days Frames Transmitted...
  • Page 33 9T125-08 Module Specific Information Stations on Ring Displays the number of active stations on the token ring. Ports Enabled Displays the number of ports on the token ring that have an ENABLE status. Active Monitor Changes Displays the number of times that the Active Monitor has changed from one station to another since the module was powered up.
  • Page 34 9T125-08 Module Specific Information Frame Copied Errors Displays the number of times that a node receives a frame with its address as the destination address, however the Address Recognized bit is already set to ‘1’. Rcvr Congestion Errors Displays the number of times that a station on the token ring recognizes its address, but it cannot copy the frame because the buffer is full.
  • Page 35 9T125-08 Module Specific Information TOKEN RING 1/TOKEN RING 2 (Toggle) Allows you to select the interface for which statistics are displayed. • If you select TOKEN RING 1, token ring statistics for the module’s number one interface are displayed. • If you select TOKEN RING 2, token ring statistics for the module’s number two interface are displayed.
  • Page 36 9T125-08 Module Specific Information...

This manual is also suitable for:

Smartswitch 9000

Table of Contents