Cabletron Systems MMAC-Plus 9T125-08 Reference Manual page 35

TOKEN RING 1/TOKEN RING 2 (Toggle)
Allows you to select the interface for which statistics are displayed.
• If you select TOKEN RING 1, token ring statistics for the module's number one
interface are displayed.
• If you select TOKEN RING 2, token ring statistics for the module's number two
interface are displayed.
Press the Space Bar to toggle to the desired value, then press the Return key.
REFRESH (Toggle)
Allows you to select the interval at which the screen will be updated (the range is
3 - 99 seconds). To increase the number of seconds, press the Space Bar while the
cursor is on the command. To decrease the number of seconds, press the Back
Space key while the cursor is on the command.
CLEAR
A command that only appears when you select ACCUMULATE as a statistic
reporting method. The CLEAR command allows you to manually reset the
screen's statistics to zero and then start to accumulate statistics from that point in
time. For example, you may have accumulated statistics for 45 minutes, but now
you want to see accumulated statistics for the current period. In this case you
would position the cursor onto the CLEAR command and press the Space Bar.
The screen's statistics will reset to zero and start to accumulate again.
RETURN
Allows you to exit the 9T125-08 Token Ring LAN Statistics Screen.
9T125-08 Module Specific Information
33