Linksys WUSBF54G User Manual page 20

Chapter 4
Default Gateway Enter the IP address of your
network's Gateway here.
DNS 1 and DNS 2
Enter the DNS address of your wired
Ethernet network here.
Click Next to continue, or click Back to return to the
Available Wireless Network screen.
2. The Wireless Mode screen shows a choice of two wireless
modes. Click the Infrastructure Mode radio button
if you want to connect to a wireless router or access
point. Click the Ad-Hoc Mode radio button if you want
to connect to another wireless device directly without
using a wireless router or access point. Then, enter the
SSID for your network.
Wireless Mode
Infrastructure Mode
Use this mode if you want to
connect to a wireless router or access point.
Ad-Hoc Mode Use this mode if you want to connect
to another wireless device directly without using a
wireless router or access point.
SSID
This is the wireless network name that must be
used for all the devices in your wireless network. It is
case- sensitive and should be a unique name to help
prevent others from entering your network.
Click Next to continue or Back to return to the previous
screen.
Wireless-G USB Network Adapter with Wi-Fi Finder
Using the Wireless Monitor
3. If you chose Infrastructure Mode, go to Step 4 now.
If you chose Ad-Hoc Mode, the Ad-Hoc Mode Settings
screen will appear.
Ad-Hoc Mode Settings
Select the correct Channel for your wireless network.
The channel you choose should match the channel
set on the other devices in your wireless network. If
you are unsure about which channel to use, keep the
default setting.
Then, select the Network Mode in which your wireless
network will operate. In Mixed Mode, Wireless-B and
Wireless-G devices can both operate on the network,
though at a slower speed. In G-Only Mode, no
Wireless-B devices can operate in the network.
Click Next to continue or click Back to change any
settings.
4. The Wireless Security screen will appear. This step will
configure wireless security.
Wireless Security
If your wireless network doesn't use wireless security,
select Disabled and then click the Next button to
continue. Proceed to Step 6.
17