Dhcp Configuration Of Tcp/Ip In Windows 98 And Me - NETGEAR WG602NA User Manual

User's Guide for the WG602 v3 54 Mbps Wireless Access Point

DHCP Configuration of TCP/IP in Windows 98 and Me

In Windows 98 and Me systems, locate your Network Neighborhood icon.
• If the Network Neighborhood icon is on the Windows desktop, position your
mouse pointer over it and right-click your mouse button.
• If the icon is not on the desktop,
•
•
•
Verify the following settings as shown:
• Client for Microsoft Network exists
• Ethernet adapter is present
• TCP/IP is present
• Primary Network Logon is set to
Windows logon
Click the Properties button. The
following TCP/IP Properties window will
display.
D-4
Click Start on the task bar located at the bottom left of the window.
Choose Settings, and then Control Panel.
Locate the Network Neighborhood icon and click it. This will open the
Network panel as shown below.
202-10060-01, September 2004
Preparing Your PCs for Network Access