D-Link DWL-3600AP Administrator's Manual page 35

Unified Access Point Administrator's Guide
Note: To apply your changes, click Apply. Changing some settings might cause the AP to stop and
restart system processes. If this happens, wireless clients will temporarily lose connectivity. We
recommend that you change AP settings when WLAN traffic is low.
If you enabled the Log Relay Host, clicking Apply will activate remote logging. The AP will send its kernel
messages real‐time for display to the remote log server monitor, a specified kernel log file, or other storage,
depending on how you configured the Log Relay Host.
If you disabled the Log Relay Host, clicking Apply will disable remote logging.
D-Link
November 2011
Unified Access Point Administrator's Guide
Viewing Events
Page 35