Table of Contents
Advertisement
Using the Focus Assist Functions (Peaking and Magnifying)
In order to make manual focusing easier, you can use
two assist functions: Peaking emphasizes the
outlines of the subject creating a clearer contrast, and
Magnifying enlarges the image on the screen. You
can also combine both for greater effect.
With the custom function [F.AST BW-MOD] (
you can set the display to change automatically to
black & white while using the focus assist functions.
The screen of an external monitor connected to the
VIEWFINDER COMPONENT OUT terminal will show
the exact same picture as displayed on the
camcorder's viewfinder screen.
Peaking
While recording or in record pause, press the PEAKING button.
•
appears and the outlines of the subject will be emphasized.
• Press the button again to change the Peaking level to
The Peaking function will not affect your recordings.
The gain and frequency of peak levels
[DISPLAY SETUP/
Magnifying
In record pause, press the MAGN. button.
• "MAGN." appears and the central part of the screen will be magnified approximately 2x.
• Press the button again to cancel the function.
The magnified picture will be output as is to the HD/SD SDI terminal (
HDV/DV terminal.
With the custom function [CUSTOM REC] (
recorded on the tape (
start recording video or record a still image on the memory card. In
Magnifying function will always be canceled when you press the PHOTO button.
You can use the custom keys (
prevent the accidental operation of the MAGN. button. With the custom function [BUTTONS
OPER.1] (
With the custom function [PHOTO BUTTON] (
to the PHOTO/MAGN. buttons.
38
]
[PEAKING SETUP] setting.
mode only) as it is, or to cancel the Magnifying function when you
71) or the [SYSTEM SETUP/
95) you can also change the operation of the MAGN. button (normal or long press).
95)
; press once more to cancel the function.
and
can be set independently with the
95) you can select to have the magnified picture
95) you can assign the magnifying function also
only) and the
mode, the
]
[MAGN.B.LOCK] setting to
Advertisement
Table of Contents
