Table of Contents
Advertisement
Condensation
Moving the camcorder rapidly between hot and cold temperatures may cause condensation (water
droplets) to form on its internal surfaces. Stop using the camcorder if condensation is detected.
Continued use may damage the camcorder.
Condensation may form in the following cases:
When the camcorder is moved from an air-conditioned room to a warm, humid place
When the camcorder is moved from a cold place to a warm room
When the camcorder is left in a humid room
When a cold room is heated rapidly
How to avoid condensation:
Unload the cassette, place the camcorder in an airtight plastic bag and let it adjust to temperature
changes slowly before removing it from the bag.
When condensation is detected:
The camcorder stops operating, and the warning message "CONDENSATION HAS BEEN
DETECTED" appears for approx. 4 seconds and
If a cassette is loaded, the warning message "CONDENSATION HAS BEEN DETECTED REMOVE
THE CASSETTE" appears and
cassette compartment open. Leaving the cassette in the camcorder may damage the tape.
A cassette cannot be loaded when condensation is detected.
Resuming use:
It takes about 1 hour until the water droplets evaporate. After the condensation warning stops
flashing, wait for 1 more hour before resuming use.
Using the Camcorder Abroad
Power Sources
You can use the compact power adapter to operate the camcorder and to charge battery packs in any
country with power supply between 100 and 240 V AC, 50/60 Hz. Consult a Canon Service Center for
information on plug adapters for overseas use.
Playback on a TV Screen
You can only play back your recordings on TVs compatible with the PAL system. PAL (or the compatible
SECAM system) is used in the following regions/countries:
Europe:
All of Europe and Russia.
(French Guiana, Guadeloupe, Martinique, etc.).
Korea, Taiwan and Myanmar).
Zealand, Papua New Guinea; most Pacific islands (except for Micronesia, Samoa, Tonga and US territories
like Guam and American Samoa).
142
starts flashing. Remove the cassette immediately and leave the
Americas:
Only in Argentina, Brazil, Uruguay and French territories
Asia:
Africa:
All of Africa and African islands.
starts flashing.
Most of Asia (except in Japan, the Philippines, South
Australia/Oceania:
Australia, New
Advertisement
Table of Contents
