Effects Parameters - Yamaha mLAN Mixer Owner's Manual

Effects Parameters

REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATE
Parameter
REV TIME 0.3–99.9 s
INI.DLY 0.0–500.0 ms
HI.RATIO 0.1–1.0
LO.RATIO 0.1–2.4
DIFF. 0–10
DENSITY 0–100%
E/R DLY 0.0–100.0 ms
E/R BAL. 0–100%
HPF Thru, 21 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru
EARLY REF.
Parameter
S-Hall, L-Hall, Random,
TYPE
Revers, Plate, Spring
ROOMSIZE 0.1–20.0
LIVENESS 0–10
INI.DLY 0.0–500.0 ms
DIFF. 0–10
DENSITY 0–100%
ER NUM. 1–19
FB GAIN –99 to +99%
HI.RATIO 0.1–1.0
HPF Thru, 21 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru
GATE REVERB, REVERSE GATE
Parameter
TYPE Type-A, Type-B
ROOMSIZE 0.1–20.0
LIVENESS 0–10
INI.DLY 0.0–500.0 ms
DIFF. 0–10
DENSITY 0–100%
HI.RATIO 0.1–1.0
ER NUM. 1–19
FB GAIN –99 to +99%
HPF Thru, 21 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru
MONO DELAY
Parameter
DELAY 0.0–2730.0 ms
FB.GAIN –99 to +99%
HI.RATIO 0.1–1.0
HPF Thru, 21 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru
Range
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Low-frequency reverb time ratio
Reverb diffusion (left–right reverb spread)
Reverb density
Delay between early reflections and reverb
Balance of early reflections and reverb (0% = ER, 100% = reverb)
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Range
Type of early reflection simulation
Reflection spacing
Early reflections decay characteristics (0 = dead, 10 = live)
Initial delay before reverb begins
Reverb diffusion (left–right reverb spread)
Reverb density
Number of early reflections
Feedback gain
High-frequency feedback ratio
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Range
Type of early reflection simulation
Reflection spacing
Early reflections decay characteristics (0 = dead, 10 = live)
Initial delay before reverb begins
Reverb diffusion (left–right reverb spread)
Reverb density
High-frequency feedback ratio
Number of early reflections
Feedback gain
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Range
Delay time
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
High-frequency feedback ratio
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Description
Description
Description
Description
20