Eq (Equalizer); Dynamics - Yamaha mLAN Mixer Owner's Manual

EQ (Equalizer)

E
EQ button
This button turns the selected channel EQ on or off. It is linked to each channel's EQ button.
F EQ Library
This parameter enables you to select a preset EQ type.
G G (dB)
This parameter sets the amount of boost (+) or cut (–) of the signal at the specified frequency (F (Hz)).
Settings: –18–+18dB (in steps of 0.5dB), ON/OFF (only when [HPF] or [LPF] is selected for the
"Type" parameter with the Macintosh version.)
H
F (Hz)
This parameter sets the equalizing frequency.
LO: ................... 21 (Hz) – 20.0 k(Hz)
L-MID: ............ 21 (Hz) – 20.0 k(Hz)
H-MID: ........... 21 (Hz) – 20.0 k(Hz)
.................... 21 (Hz) – 20.0 k(Hz)
HI:
I Q
This parameter sets the frequency range for boost and cut. The higher the value is, the smoother the
changes in the specified frequency range. With the Macintosh version, use this parameter to make
the setting for "Type."
Settings: 10.0–0.10
J Type (Windows only)
This parameter enables you to select a type of EQ.
With the Macintosh version, set the Q value (
select a Type.
[LO]
PEAK (peaking):
LSLV (low-shelving): A shelving-type equalizer that boosts and cuts the signal in the low range.
LPF (low pass filter): A filter that cuts the frequency range above the threshold specified by the "F
[HI]
PEAK (peaking):
HSLV (high-shelving): A shelving-type equalizer that boosts and cuts the signal in the high range.
HPF (high pass filter): A filter that cuts the frequency range below the threshold specified by the "F
mLAN Mixer uses a 4-band full parametric equalizer. Basically, a parametric equal-
izer changes a tone by boosting (+) or cutting (–) the signal at the specified fre-
quency. Boosting emphasizes the corresponding frequency range, and cutting
attenuates the range. mLAN Mixer offers many presets suitable for various applica-
tions. Select one that suits your application, and fine tune it for quick operation.

Dynamics

K Dynamics button
This button turns the dynamics processor of the selected channel on or off. This button is linked
with each channel's Dynamics button.
L Dyna (Dynamics) Library
Select the desired Dynamics type (page 34).
A normal parametric equalizer
(frequency)" parameter.
A normal parametric equalizer
(frequency)" parameter.
9
) to the maximum or minimum to
11