52
Chapter 5: CUE
ProMix 01 User's Guide
CUE LCD Function Info
As well as being used to set the CUE mode, the CUE LCD function
displays various information about the currently selected channel.
The exact information shown depends on the type of channel
selected. CUE displays for each type of channel are shown below.
Input Channel
This is the CUE LCD function when an input channel is selected.
Group
Channel ON/OFF
SEND PRE/POST
Selected
channel
CH: channel-to-mix fader
S1: channel-to-SEND1 fader
S2: channel-to-SEND2 fader
S3: channel-to-SEND3 fader
S4: channel-to-SEND4 fader
Stereo-Pair Input Channels
This is the CUE LCD function when stereo-pair input channels are
selected. It is, essentially, the same as the one above apart from the
differences indicated. This example display also shows how the fader
knob marker is filled when a fader is set at the 0dB position. Markers
are also filled when faders are set at minimum ( ).
Selected
Filled markers
channel pair
Phase
Pan
CUE mode
EQ curve
EQ ON/OFF
Dual pan
COMP patch
and ON/OFF
COMP GR
meter
Meter for
selected channel
Meters for
selected pair