Antennas With 75-Ohm Round Leads; Separate Vhf And Uhf Antennas; Connecting Cable Tv; Cable Without A Cable Box - Samsung CT-21T20MQ Owner's Instructions Manual

Hide thumbs Also See for CT-21T20MQ:
Table of Contents

Advertisement

AA68-03465A-00Eng_XTC
I
N S TA L L AT I O N

Antennas with 75-ohm Round Leads

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires a an optional combiner-adaptor (available at most electronics shops).

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

10
5/7/04
1:30 PM
Page 10
1
Plug the antenna lead
into the VHF/UHF
terminal on the bottom of
the back panel.
1
Connect both antenna
leads to the combiner.
2
Plug the combiner into
the VHF/UHF terminal
on the bottom of the
rear panel.
1
Plug the incoming cable
into the VHF/UHF
antenna terminal on back
of the TV.
Because this TV is
cable-ready, you do not need a
cable box to view unscrambled cable
channels.

Advertisement

Table of Contents
loading

Table of Contents