Connecting Vhf And Uhf Antennas; Antennas With 300-Ohm Flat Twin Leads; Antennas With 75-Ohm Round Leads; Separate Vhf And Uhf Antennas - Samsung HLN467W Instruction Manual

Connections

Connecting VHF and UHF Antennas

If you do not have a cable system, you will need to connect an antenna to your TV.

Antennas with 300-ohm Flat Twin Leads

If your antenna looks like this:
Place the wires from the twin
1
leads under the screws on the
300-75 ohm adapter. Use a
screwdriver to tighten the
screws.
2 Plug the adapter into the
ANT-A terminal on the back
panel of the TV.

Antennas with 75-ohm Round Leads

If your antenna looks like this:
Plug the antenna lead into the
1
ANT-A terminal on the back
panel of the TV.
20
it has 300-ohm flat twin leads.
it is an antenna with 75-ohm round leads.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the
two antenna signals before connecting them to the TV. This requires a combiner attachment, which
you can buy at an electronics store.
Connect both antenna
1
leads to the combiner.
Plug the combiner into the
2
ANT-A terminal on the
back panel of the TV.
21