AA68-03465A-00Eng_XTC
I
N S TA L L AT I O N
Connecting to a Cable Box that Descrambles All Channels
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch and four lengths of
coaxial cable. (These items are available at most electronics stores.)
5/7/04
1:30 PM
Page 11
1
Find the cable that is
connected to the ANTEN-
NA OUT terminal on your
cable box.
2
Connect the other end of
this cable to the
VHF/UHF antenna
terminal on the back of
the TV.
1
Find and disconnect the
cable that is connected
to the ANTENNA IN
terminal on your
cable box.
2
Connect this cable to a
two-way splitter.
Incoming Cable
3
Connect a coaxial cable
between an OUTPUT ter-
minal on the splitter and
the IN terminal on the
cable box.
This terminal might be labeled
"ANT OUT", "VHF OUT" or simply,
"OUT".
This terminal might be labeled
"ANT IN", "VHF IN" or simply,
"IN".
Splitter
Incoming Cable
Splitter
Cable Box
11