Connecting A Vcr - Samsung CT-21T20MQ Owner's Instructions Manual

AA68-03465A-00Eng_XTC
I
N S TA L L AT I O N
After you've made this connection, set the A/B switch to the "A" position for normal view-
ing. Set the A/B switch to the "B" position to view scrambled channels. (When you set the
A/B switch to "B", you will need to tune your TV to the cable box' s output channel, which is
usually channel 3 or 4.)

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable
TV system (according to the instructions on pages 9-11). Skip step 1 if you have not yet
connected to an antenna or a cable system.
12
5/7/04 1:30 PM Page 12
4
Connect a coaxial cable
between the ANTENNA
OUT terminal on the cable
Incoming
Cable
box and the B–IN terminal
on the RF(A/B) switch.
5
Connect another cable
between the other OUT ter-
minal on the splitter and
the A–IN terminal on the
RF (A/B) switch.
6
Connect the last coaxial
cable between the OUT
terminal on the RF (A/B)
Incoming
Cable
switch and the VHF/UHF
terminal on the rear of the
TV.
1
Unplug the cable or
antenna from the back of
the TV.
2
Connect the cable or
antenna to the
Incoming
ANTENNA IN terminal on
Cable or
the back of the VCR.
Antenna
Splitter
Cable Box
Incoming
Cable
Splitter
Splitter
Cable Box
VCR Rear Panel
RF (A/B)
Switch
RF (A/B)
Switch
Cable Box
RF (A/B)
TV Rear
Switch