Table of Contents
Advertisement
AA68-03173A_00(E)-CHAPTER 3
O
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., "CBS", "ESPN",
"PBS2", CNN1", etc.) A label consists of four fields, where each field is a letter, a num-
ber, "*", or a blank. When the DISPLAY button is pressed, the channel label will appear
next to the channel number.
1
Press the CH
button to tune to the channel
that will be labeled.
2
Press the MENU button to dis-
play the menu, then press the
M button to select "Channel".
Press the √ √ button.
3
Press the M button to select
"Labeling".
Press the √ √ button to begin
labeling. The left-most field will
be highlighted.
(Each label has four fields.
See top paragraph.)
4
Press the L or M button to
select a letter, a number, "*", or
a blank. (Pressing the L button
results in this sequence:
A,B,...Z,*, blank,0,1,...9).
5
Press the √ √ button to switch to
the next field, which will be
highlighted. Select a second
letter or digit using the L and M
buttons, as above. Repeat the
process to select the last two
digits.
Press the MENU button to set the label and clear the menus from
the screen.
9/15/03
11:56 AM
P E R AT I O N
or CH
Page 31
Note: You cannot select
"Labeling" in the A/V mode.
31
Advertisement
Table of Contents
