Changing Channels; Using The Channel Buttons; Directly Accessing Channels; Using The Pre-Ch Button To Select The Previous Channel - Samsung CT-29V10MQ Owner's Instructions Manual

AA68-03173A_00(E)-CHAPTER 3
O

Changing Channels

Using the Channel Buttons

1
Press the CH
When you press CH
channels that the TV has memorized. (The TV must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.

Directly Accessing Channels

Use the number buttons to quickly tune to any channel.
1
Press the number buttons to go directly to a channel.
For example, to select channel 27, press "2", then "7".
The TV will change channels when you press the
second number.
When you use the number buttons, you can directly select channels that were either erased or
not memorized.
To select a channel over 100, press the +100 button. (For channel 122, press "+100", then "2",
then "2".)
To change to single-digit channels (0–9) faster, press "0" before the
single digit. (For channel "4", press "0", then "4".)

Using the PRE-CH Button to select the Previous Channel

1
Press the PRE-CH button.
The TV will switch to the last channel viewed.

Adjusting the Volume

Press the VOL + or VOL– button to increase or decrease the volume.

Using Mute

At any time, you can temporarily cut off the sound using the Mute button.
1
Press the MUTE button and the sound cuts off.
The word "Mute" will appear in the lower-left corner of the
screen.
2
To turn mute off, press the MUTE button again, or simply press
either the VOL – or VOL + button.
30
9/15/03 11:56 AM
P E R AT I O N
or CH button to change channels.
or CH
Page 30
, the TV changes channels in sequence. You will see all the
channels that are far apart, tune to
one channel, then use the number
button to select the second channel.
Then, use the PRE-CH button to
quickly alternate between them.
To quickly switch between two