Choosing the Heating Element Position
The heating element is used when grilling. It can be placed in one of
GB
two positions:
•
Horizontal position for grilling or combined microwave +
grill cooking
☛
Only change the position of the heating element when it is cold
and do not apply excessive force when placing it in the vertical
position.
To set the heating element
to the...
Horizontal position (grill or
combined microwave +
grill)
When cleaning the upper part inside the cavity, it will be
convenient to turn the heater downward by 45° and clean it.
Choosing the Accessories
Use microwave-safe recipients; do not use plastic containers, dishes,
paper cups, towels, etc.
If you wish to select the combined cooking mode (grill and
microwave), use only dishes that are microwave-safe and
oven-proof. Metallic cookware or utensils may damage your
oven.
✉
For further details on suitable cookware and utensils, refer to the
Cookware Guide on page 14.
Then...
◆ Pull the heating element
towards you
◆ Push it upwards until it is
parallel with the roof of the
oven
12
Grilling
The grill enables you to heat and brown food quickly, without using
microwaves. For this purpose, a grill rack is supplied with your
microwave oven.
1. Preheat the grill to the required temperature, by the turning
the cooking power control knob to grill symbol (
turning the TIME/WEIGHT(
time.
2. Open the door and place the food on the rack.
3. Set the time by turning the TIME/WEIGHT (
Result:
✉
Do not worry if the heater turns off and on while grilling.
This system is designed to prevent overheating of the oven.
☛
Always use oven gloves when touching the dishes in the oven, as
they will be very hot.
Check that the heating element is in the horizontal position.
) knob to the appropriate
The oven light comes on and the turntable
starts rotating.
1) Cooking starts and when it has finished the
oven beeps four times.
2) The end reminder signal will beep 3 times
(once every minute).
3) The current time is displayed again.
) and
) dial.