Timer Function; Cancelling The Timer - Samsung MAX-ZS940 Instruction Manual

MAX-ZS990 GB RDS 18~28

Timer Function

GB
The timer enables you to switch the system on or off at
specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing ECO/STANDBY/ON.
2
Press TIMER/CLOCK until
3
Press ENTER/DISPLAY.
Result: ON TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
4
Set the timer switch-on time.
a Set the hour by tuning the MULTI JOG knob to the right or to the
left.
b Press ENTER/DISPLAY.
Result: The minutes flash.
c Set the minutes by tuning the MULTI JOG knob to the right or to
the left.
d Press ENTER/DISPLAY.
Result: OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
5
Set the timer switch-off time.
a Set the hour by tuning the MULTI JOG knob to the right or to the
left.
b Press ENTER/DISPLAY.
Result: The minutes flash.
c Set the minutes by tuning the MULTI JOG knob to the right or to
the left.
d Press ENTER/DISPLAY.
Result: VOL XX is displayed, where XX corresponds to the
volume already set.
6
Press TUNING Down and Up to adjust the volume level and press
ENTER/DISPLAY.
Result: The source to be selected is displayed.
7
Turn the MULTI JOG knob to select the source to be played when
the system switches on.
If you select...
TAPE (cassette)
TUNER (radio)
CD (compact disc)
8
Press ENTER/DISPLAY to confirm the timer.
9
Press ECO/STANDBY/ON to set the system to standby mode.
Result: is displayed to the bottom left of the time, indicating that
the timer has been set. The system will switch on and off
automatically at the required times.
22
9/19/04 10:05 Page 22
TIMER is displayed.
You must also...
Insert a recorded cassette in one of
the decks before setting the
system to standby.
a Press ENTER/DISPLAY.
b Select a preset station by tuning
the Multi Jog knob to the right or
to the left.
Load one or more compact discs.
If the timer switch on and off times are identical, the word ERROR is
displayed.
1,9
2
6
To set the timer function
You may use MULTI JOG or
4, 5, 6, 7.
You can also use PROGRAM/SET button on the remote control
to instead ENTER/DISPLAY button in step 3, 4, 5, 6, 7.

Cancelling the Timer

After having set the timer, it will start automatically as shown
by the TIMER indication on the display. If you no longer wish
to use the timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To...
Cancel the timer
Restart the timer
AUX
TUNER
BAND
DEMO/DIMMER
TIMER ON/OFF
PROGRAM/SET
AI SLEEP
DISC SKIP SHUFFLE
CD/MP3-CD
4,5,7
6
3,4,5,6,7,8
/ buttons to adjust in step
Press Timer-On/Off...
Once.
Result: is no longer displayed.
Twice.
Result: is displayed again.
MUTE
P.SURROUND
SOUND MODE
MEDLEY
CD REPEAT