Setting The System To Switch Off Automatically; Maxx Bass Level Function(Max-Zs940/Zs990); S.bass Level Function(Max-Zs930/Zs950); Connecting Headphones - Samsung MAX-ZS940 Instruction Manual

MAX-ZS990 GB RDS 18~28
Setting the System to Switch off
Automatically
While listening to a compact disc or a cassette, you can
set the system to switch off automatically
Example: You wish to go to sleep to music.
1
Press AI SLEEP.
Result: playback starts and the following indications are displayed:
90 MIN
2
Press AI SLEEP once or more times to indicate how long the
system should continue playing before it switches off:
At any time, you can:
Check the remaining time by pressing AI SLEEP
Change the remaining time by repeating Steps 1 and 2
3
Press AI SLEEP once or more times until AI SLEEP is displayed.
Result: The system will automatically switch off at the end of the disc
or cassette.
4
To cancel SLEEP function, press AI SLEEP once or more times until
OFF is display.
BAND
TIMER ON/OFF
AI SLEEP
DISC SKIP
MAXX BASS Level Function
(MAX-ZS940/ZS990)
MAXX BASS utilizes the principle of the missing fundamental
,which creates the sensation of low frequencies by generating
a carefully calculated series of harmonics designed to simu-
late the auditory experience caused by the missing fundamen-
tal pitch. These harmonics extend the virtual frequency
response up to two-third or
speaker cutoff frequency without perceived distortion or
increased power consumption.MAXX BASS function stresses
low tones providing thudding sound effects.
1
press MAXX BASS button on the front panel to select:
"M-BASS 1 M-BASS 2
2
You can select the level of low tones you desire.
24
9/19/04 10:05 Page 24
DEMO/DIMMER SOUND MODE
PROGRAM/SET MEDLEY
SHUFFLE CD REPEAT
CD/MP3-CD
1 /2 octaves below the physical
1
M-BASS 3 M-BASS 4 OFF".
S.BASS Level Function
(MAX-ZS930/MAX-ZS950)
Super BASS function stresses low tones providing thudding
sound effects.
1
press S.BASS button on the front panel to select:
"S-BASS 1 S-BASS 2 S-BASS 3
2
You can select the level of low tones you desire.

Connecting Headphones

You can connect a set of headphones to your mini-compact
system so that you can listen to music or radio programmers
without disturbing other people in the room. The headphones
ø
must have a 3.5 jack or an appropriate adapter.
Connect the headphones to the PHONES jack on the front panel.
Result: The loudspeakers are no longer used to output the sound.
Prolonged use of headphones at a high volume may damage
your hearing.
GB
S-BASS 4 OFF".
.