Protecting A Recorded Cassette; Recording A Programme Immediately; Recording A Programme With Automatic Stop - Samsung SV-DVD3E Instruction Manual

VCR

Protecting a Recorded Cassette

GB Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
1
1
2
VCR

Recording a Programme Immediately

Before recording a programme, you must have preset the corres-
ponding station (unless you are recording via an external video
DVD VIEW VCR INPUT SEL.
source). If you have not done so, refer to pages 20 and 21.
4
1
DIGEST DISPLAY
TRK PROG
F.ADV/STEP
2
4
REC DISC MENU
3
REC DISC MENU
6
SETUP 4
/ENTER
5
RETURN TITLE SUBTITLE MARK
A.DUB SPEED TIMER INDEX
TRK PROG
F.ADV/STEP
5
6
REC DISC MENU
7
SETUP
/ENTER
7
30
If you wish to protect a cassette, break off the tab using a small
screwdriver.
To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.
Switch on the television.
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result: The DVD-VCR is switched on automatically.
Select:
The station to be recorded using the PROG (" or ❷) buttons
or
The AV1, AV2 or AUX source using the INPUT SEL. button
for a satellite tuner or external video source
Result: The station number is displayed and the programme
can be seen on the television.
Select the recording speed by pressing the SPEED button as
many times as required (see page 29).
Hold REC ( ) down for a while to start recording.
Result: The record indicator appears on the television and DVD-
VCR display. An index is recorded on the tape (see
page 39).
To stop recording, press once.
If your DVD-VCR ejects the cassette when you start
recording, check to make sure that the cassette's
safety tab is intact or that the opening (created by a
broken safety tab) is covered with adhesive tape.
If you reach the end of the tape while recording, the
cassette rewinds automatically.

Recording a Programme with Automatic Stop

This function enables you to record up to nine hours (LP) of
programmes.
Your DVD-VCR stops automatically after the requested length of
time.
1
Switch on the television.
2
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result: The DVD-VCR is switched on automatically.
4 Select:
The station to be recorded using the PROG (" or ❷) buttons
or
The AV1, AV2 or AUX source using the INPUT SEL. button
for a satellite tuner or external video source
Result: The channel number is displayed and the programme
can be seen on the television.
5
Select the recording speed by pressing the SPEED button as
many times as required (see page 29).
6
Hold the REC button ( ) down for a while to start recording.
Result: The record indicator appears on the television screen
and DVD-VCR display. An index is recorded on the
tape (see page 39).
7
Press the REC button ( ) several times to increase the
recording time in:
30-minute intervals up to four hours
1-hour intervals up to nine hours (LP)
Result: The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the DVD-VCR stops
recording automatically.
8
If you wish to cancel the recording before the end, press
STANDBY/ON.
If the end of the tape is reached while recording:
The recording stops
VCR
GB
OPEN/CLOSE EJECT
STANDBY/ON SELECT COPY
PROG REC
AUX
VIDEO L AUDIO R
3
DVD VIEW VCR INPUT SEL.
4
DIGEST DISPLAY
TRK PROG
F.ADV/STEP
4
REC DISC MENU
REC DISC MENU
6
SETUP
/ENTER
5
RETURN TITLE SUBTITLE MARK
A.DUB SPEED TIMER INDEX
LENGTH 2:30
SET LENGTH :
PRESS REC
31