Presetting The Stations Automatically; Presetting The Stations Manually - Samsung SV-DVD3E Instruction Manual

VCR

Presetting the Stations Automatically

GB
REC DISC MENU
2
SETUP
2 /ENTER 2
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
1
2
You must preset the stations received through the tuner. This can
RETURN TITLE SUBTITLE MARK
be done:
MAIN MENU
You can store up to 80 stations.
DVD VCR Option Language
1
Program Clock Install Install Exit
INSTALLATION
➛!!!❿
RETURN ENTER
"❷!!
2
3
INSTALLATION
4
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
5
RETURN " ❷!!!! ENTER
6
COUNTRY SELECTION
A I TR
B N GR
DK P HU
FIN E PL 7
D S CZ
NL CH OTHERS
RETURN ➛!!!❿ ENTER
"❷!!
YOUR DATA WILL BE LOST
PRESS ENTER TO CONTINUE
RETURN TO EXIT
8
AUTO SET UP
PLEASE WAIT
2%
I--------------------I
RETURN
20
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on page 13).
Plug & Auto Set up (see page 13)
Automatically
Manually (see page 21)
Press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
Press the corresponding , or ➛, ❿ buttons to select the
" ❷
option.
INSTALLATION
Press the ENTER button to select this option.
Result: The INSTALLATION menu is displayed.
Press the corresponding or buttons, until the AUTO SET UP
" ❷
option is selected. And then press the ENTER button to select this
option.
Result: The country selection MENU is displayed.
Press the or buttons to select your country.
" ❷
The VCR searches for the stations according to a preset
preference list corresponding to the country that you have
selected.
Press ENTER button.
Result: A message appears, indicating that any channels
already preset on your VCR will be deleted.
Press ENTER to start the auto scanning.
Result: The PLEASE WAIT indication flashes on the
television screen.
The first frequency band is scanned and the first
station found is displayed and stored.
The DVD-VCR then searches for the second station
and so on.
When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
If you wish to cancel the auto scanning before the end, press the
RETURN button three times to exit the menu.
The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automati-
cally. In this case, they should be set manually (see
page 18).
Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 35).

Presetting the Stations Manually

You do not need to preset the stations manually if you
have already set them automatically.
1 Press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
2 or ➛, ❿ buttons to select the
Press the corresponding ,
" ❷
INSTALLATION option.
3 Press the ENTER button to select this option.
Result: The menu is displayed.
INSTALLATION
4
Press the corresponding or buttons, until the MANUAL SET
" ❷
UP option is selected.
5 Press the ENTER button to select a
MANUAL SET UP
Result: The menu is displayed.
TV STATION TABLE
6
Press the or buttons to select a programme number as
" ❷
required.
7 Press the ❿ button to preset the station.
Result: The MANUAL TUNING menu is displayed.
8 Press the ➛ or ❿ buttons to start scanning.
Result: The frequency band is scanned and the first station
found is displayed.
9
Press the button, until the DECODER is selected.
❷
10 Press the ❿ button to activate or deactivate use of the decoder
for the TV station, if necessary.
11
Press the or buttons until the NAME is selected.
" ❷
The station name is set automatically from the broadcast signal.
12 To change the programme's name, press the ❿!button.
Result: The first letter of the name flashes.
13 To... Then...
Select a character Press the or button until the
" ❷
in the name required character is displayed
(letters, numbers or "-" character).
Press the ❿ or ➛ buttons
Move to the next or
previous character respectively.
14
If you... Then...
Wish to store the Press the or buttons until the
" ❷!
station displayed is selected.
Press the ➛ or ❿ buttons to adjust the
picture, if necessary.
Press ENTER to store the station
Do not wish to Press the or buttons until the
" ❷
store the station is selected.
displayed Press the ➛ or ❿ buttons to go on
scanning the frequency band and display
the next station
Go back to the beginning of Step
15 6
Repeat this procedure from Step onwards, until all the required
stations have been stored.
16
On completion, press the RETURN button three times to exit the
menu.
VCR
MAIN MENU
DVD VCR Option Language
Program Clock Install Install Exit
INSTALLATION
RETURN ➛!!!❿ ENTER
"❷!!
option.
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN ENTER
" ❷!!!!
TV STATION TABLE
PR CH NAME DEC
1
2
3
4
5
❿!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
" ❷ SWAPPING:ENTER
RETURN DELETE:CLEAR
MANUAL TUNING
PR :
CH : ---
MFT : -
DECODER : OFF
NAME : ----
MFT
➛ ❿!!!
" ❷!!! MEMORY:ENTER
RETURN
CH
14
21
GB