Setting The Av2 Connection; Switching Between The Tv And Vcr Modes; Selecting The Cassette Type; Selecting The Recording Speed - Samsung SV-DVD1E Instruction Manual

Setting the AV2 Connection

If you wish to use the AV2 socket for a PAY TV DECODER, you
must change AV2 to the required position.
GB
I N S T A L L A T I O N
E N T E R E N D :S E T U P
AUTO SET UP
MANUAL SET UP
TV SYSTEM : G
VCR OUTPUT CH : C H 3 6
AV2 SET : D E C
E N D :S E T U P

Switching between the TV and VCR Modes

The TV/VCR button allows you to record one channel with the VCR
while you watch another channel on the TV.
On
Off (or the VCR is turned off)
24
1
Press SETUP on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding , or , buttons to select the
I N S T A L L A T I O N option.
3
Press the ENTER button to select this option.
Result: The menu is displayed.
I N S T A L L A T I O N
4 Press the corresponding or buttons, until the cursor is
placed in front of the AV2 SET option.
5
When... Press or , until...
Another VCR or Satellite E X T is displayed.
receiver is connected to
the AV2 (DEC./EXT.) socket
The decoder is connected to DEC is displayed.
the AV2 (DEC./EXT.) socket
6 On completion, press SETUP twice to exit the menu.
Your television...
The television receives the picture from
the VCR and you can select channels
with the PROG ( or ) buttons on the
VCR or the remote control.
Initial setting is ON.
The television receives the picture from
your home aerial or cable television
system as it did before you connected
the VCR.
You can then use the programme (
) buttons on your television to select
the channels.

Selecting the Cassette Type

If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1 Press SETUP on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding , or ,
USER SET option.
3 Press the ENTER button to select this option.
4 Press the corresponding or
in front of the TAPE SELECT option.
5
Press the or buttons as many times as required, until the
correct cassette length is displayed.
E180 E240
E 300 E260
6
Press SETUP twice to exit the menu.

Selecting the Recording Speed

You can record a cassette at two different speeds:
SP (Standard Play)
LP (Long Play)
In Long Play modes:
Each cassette lasts twice as long
The recording is of a slightly lower quality
To record a cassette... Press the SPEED button on the
remote control, until...
In standard play mode is displayed.
S P
In long play mode is displayed.
L P
or
buttons to select the
USER SET
E N T E R
buttons, until the cursor is placed
O S D
TAPE SELECT
COLOUR SYSTEM
I P C
N I C A M
Type Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours
GB
E N D :S E T U P
: O N
: E 1 8 0
: A U T O
: O N
: O N
E N D :S E T U P
25