Table of Contents
Advertisement
Display Related
Q1 The LCD screen is blank.
A
Adjust the LCD screen brightness. Use the <Fn+Up Arrow>, <Fn+Down
Arrow> keys.
Q2 The screen saver disturbs screen viewing during Media Player or video file
operation.
A
Under the Media Player Options, in Player > Enable Screen Saver During Use,
uncheck the box and restart the player.
Q3 In DOS mode, changing the full screen DOS mode by pressing
<ALT+Enter> key displays a broken image for a short period.
A
The DOS mode which supports 2 Byte characters such as Korean and Japanese
runs in graphic not in text mode. In this case, a broken image may be displayed
while changing the video mode settings.
Q4 In the following cases, the screen blinks or displays noise for a short time:
(Changing the resolution, changing the display device, removing the AC
adapter, restarting the system)
A
This may happen while the video driver is examining the connected device.
Q5 When I connected a projector to the computer and pressed <Fn>+<F4 /
LCD/CRT> keys, display devices are not converted properly.
A1
Press <Fn>+<F4 / LCD/CRT> keys once more.
A2
Convert display devices on [Graphics controller properties] dialog. (Refer to
"Using External Display Devices" (p 60).)
A3
Press <Ctrl>+<Alt>+<F1> keys to change the setting to CRT, or press
<Ctrl>+<Alt>+<F3> keys to change to LCD.
Q6 Extended Desktop is not configured on [Display Properties] dialog. (Start >
Control Panel > Appearance and Themes > Display > Settings tab)
A
Change the setting to extended desktop on [Graphics Controller Properties]
dialog. (Refer to "Using External Display Devices" (p 60).)
80 Users Manual
Advertisement
Table of Contents
