Table of Contents
Advertisement
Display Related
Q1 The LCD screen is blank.
A Adjust the LCD screen brightness. Use the <Fn> + <
Q2 The screen saver disturbs screen viewing during Media Player or
A Under the Media Player Options, in Player > Enable Screen Saver During Use,
Q3 In DOS mode, changing the full screen DOS mode by pressing
A The DOS mode which supports 2 Byte characters such as Korean and Japanese
Q4 In the following cases, the screen blinks or displays noise for a
A This may happen while the video driver is examining the connected device.
Q5 When I connect a projector, and change the setting to display
A Press <Fn>+<F4 / LCD/CRT> keys once again.
Q6 The desktop momentarily appears as a broken image when
A Since zooming in or out of the Media Player screen changes the screen resolu-
Manual
7-10
video file operation.
uncheck the box and restart the player.
ALT+Enter key displays a broken image for a short period.
runs in graphic not in text mode. In this case, a broken image may be displayed
while changing the video mode settings.
short time:
(Clicking the nView tab, changing the resolution, changing the display device,
removing the AC adapter, restarting the system, or changing the PowerMizer
level)
screen image on both the LCD and the projector by pressing
<Fn>+<F4 / LCD/CRT> keys, screen is not displayed properly.
zooming in or out of the Media Player screen when Media
Player is running.
tion, the desktop may momentarily appear as a 'broken image' during this oper-
ation.
>, <Fn> + <
> keys.
Hide quick links:
Advertisement
Table of Contents
