Table of Contents
Advertisement
ENGLISH
IEEE 1394 Data Transfer
Transferring IEEE1394 (i.LINK)-DV standard data connections
Connecting to a DV device
Connecting with other DV standard products.
A standard DV connection is quite simple.
If a product has a DV port, you can transfer data by connecting to the
DV port using the correct cable.
!!! Please be careful since there are two types of DV ports, (4pin, 6pin).
This camcorder has a 4pin terminal.
With a digital connection, video and audio signals are transmitted in digital
format, allowing high quality images to be transferred.
Connecting to a PC
If you want to transmit data to a PC, you
must install a IEEE 1394 add-on card onto
the PC. (Not supplied)
Turn off the power of both the camcorder
and the PC before connecting.
Optional software necessary.
The frame rate recorded for video capturing
is dependent on the capacity of the PC.
System requirements
CPU : faster Intel
®
Pentium III™ 450Mhz compatible.
Operating system : Windows
®
Main memory : more than 64 MB RAM
IEEE1394 add-on card or built in IEEE1394 card
Notes
When you transmit data from the camcorder to another DV device, some
functions may not work. If this occurs, please reconnect the DV cable or turn the
power OFF and ON again.
Operation may not work correctly, depending on the software you are using, and
the specifications of your PC and its settings.
-
See your PC instruction manual for details.
When you transmit data from the camcorder to PC, PC function button is
available in PLAYER mode only.
Do not use the camcorder and IEEE1394 together as this will cause IEEE1394 to
shut off.
Do not disconnect the DV cable while data is being transferred to the PC.
76
76
98SE, ME, 2000, XP, Mac OS (9.1~10.2)
IEEE 1394
IEEE 1394 (i.LINK) DV
DV
!!!
CPU Intel
®
Pentium III™ 450Mhz
Windows
®
98SE, ME, 2000, XP, Mac OS (9.1~10.2)
64 MB RAM
IEEE1394
IEEE 1394
-
IEEE1394
IEEE1394
Advertisement
Table of Contents
