Using The Built-In Flash; Flash Select - Samsung SC-D93 Owner's Instruction Book

Hide thumbs Also See for SC-D93:
Table of Contents

Advertisement

ENGLISH
Advanced Recording
Using the Built - in Flash
You can take natural looking flash pictures with appropriate illumination using
the built-in flash or attaching the VL-S1FL video Light/ Flash (optional) to the
camcorder's Smart shoe (SCD99 only; see page 100), whether they are night
scenes, in doors or in other dark places.
OFF : The flash does not fire.
(Auto) : The flash comes on depending on the brightness of the subject.
(Flash on) : The flash comes on regardless of the brightness of the subject.
(Red-eye reduction auto: built-in flash only) : The flash pre-fires
automatically before the main firing to reduce the red-eye phenomenon.

FLASH SELECT

The FLASH SELECT function works in CAM and M.REC mode.
1. Set the camcorder to CAM mode.
2. Press the MENU button.
The menu list will appear
3. Move the MENU SELECTOR to highlight CAMERA and
push the MENU SELECTOR.
4. Select FLASH SELECT from the submenu and push the
MENU SELECTOR.
5. Using the MENU SELECTOR, Select the FLASH SELECT
mode.
Push the MENU SELECTOR to confirm the FLASH
SELECT mode.
6. To exit, press the MENU button.
Warning!
Do not fire the flash with the flash bulb
covered with your hand.
Do not fire the flash close to people's eyes.
Notes
While using the following functions, you cannot use the
FLASH function:
-
PROGRAM AE, SHUTTER SPEED, EXPOSURE,
STROBE (DSE function), SLOW SHUTTER,
CONTINUOUS SHOT, MEMORY MIX
-
When you are recording movies onto a tape.
If the flash is forced to fire (Flash on) in a bright location,
the effect of flash photography may sometimes not be obtained.
When
(Red-eye reduction auto) is set, the flash fires
twice-once to perform red-eye reduction and the second flash
main firing for taking the photograph.
It takes about 1.5 second between the flash firing for red-eye
52
52
reduction and the main firing.
CAM MODE
1.
INITIAL
CAMERA
PROGRAM AE
2.
A/V
WHT. BALANCE
MEMORY
D.ZOOM
EIS
VIEWER
DSE SELECT
3.
MEMORY MIX
FLASH SELECT
4.
5.
CAM MODE
CAMERA SET
PROGRAM AE
6.
WHT. BALANCE
D.ZOOM
EIS
DSE SELECT
MEMORY MIX
FLASH SELECT
CAM MODE
CAMERA SET
FLASH SELECT
AUTO
FLASH ON
RED EYE REDUCTION
FLASH SELECT(
-
-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scd99Scd93

Table of Contents