Table of Contents
Advertisement
ENGLISH
Advanced Recording
Recording Superimposed images on a tape
Insert a tape for recording into your camcorder.
Insert a Memory Stick is recorded still images into your camcorder.
1. Set the camcorder to CAM mode.
2. Press the MENU button.
The menu list will appear.
3. Move the MENU SELECTOR to highlight CAMERA
and push the MENU SELECTOR.
4. Select MEMORY MIX from the submenu and
push the MENU SELECTOR.
5. Move the MENU SELECTOR to select the desired
MEMORY MIX mode and push the
MENU SELECTOR.
Your currently recording image is combined with
the last recorded image.
6. Press the
(FWD)/
(REV) buttons to select
the still image you want to superimpose.
7. Move the MENU SELECTOR to adjust the mix level
Push the MENU SELECTOR to confirm the
MEMORY MIX mode.
8. To exit, press the MENU button.
Your selected MEMORY MIX mode is flashed
in the display.
9. Press the MEMORY MIX button.
The still image is superimposed on the moving
image.
Each time you press the MEMORY MIX button,
your selection is activated (display lights
continuously) or de activated (display flashes)
10. Press the START/STOP button to start recording.
The superimposed images are recorded onto the tape.
Note
If you turn the position of the power switch, select your still image for
MEMORY MIX again.
1.
CAM MODE
2.
INITIAL
CAMERA
PROGRAM AE
A/V
WHT. BALANCE
D.ZOOM
MEMORY
3.
VIEWER
EIS
DSE SELECT
MEMORY MIX
FLASH SELECT
4.
CAM MODE
5.
CAMERA SET
PROGRAM AE
WHT. BALANCE
D.ZOOM
EIS
DSE SELECT
6.
MEMORY MIX
FLASH SELECT
7.
STBY
CAM MODE
CAMERA SET
[07/07]
MEMORY MIX
M.CHROMA
8.
M.LUMI
C.LUMI
M.OVERLAP
9.
10.
51
51
Advertisement
Table of Contents
