ENGLISH
Playing back the Tape
DSE in PLAYER mode
The procedure for using DSE in PLAYER mode is the same as the
procedure for using DSE in CAMERA mode, except that the power
switch must be set to PLAYER instead of CAMERA.
Please refer to pages 40 and 41.
Note: The GHOST, STROBE, NEG., MIRROR, MOSAIC, CINEMA
and WIDE(16:9) effects will not operate when your camcorder
is in PLAYER mode.
Pressing the DSE button will scroll through the available settings.
Stop at the one you require.
Maintenance
Cleaning and Careing for your Camcorder
Cleaning the Viewfinder
Releasing the Eyepiece
1. Pull the viewfinder up and turn the screw
counter-clock-wise.
2. Pull the eyepiece away from the viewfinder.
3. Clean the Eyepiece and the VIEWFINDER
screen with a soft cloth and cotton swab or
a blower.
Reattaching the Eyepiece
4.
Replace the Eyepiece on the VIEWFINDER.
5.
Replace and tighten the screw.
Cleaning the LCD panel
Open the LCD display panel and wipe it gently with a soft cloth.
Be careful not to damage the display.
56
Reproducir una cinta
DSE en modo PLAYER
El proceso de uso de DSE en el modo PLAYER es idéntico al
proceso de uso de DSE en el modo CAMERA, excepto que el
interruptor de encendido debe estar fijado a PLAYER en vez de
CAMERA. Por favor, consulte a las páginas 38 y 39.
Nota: En el modo GHOST, STROBE, NEG., MIRROR, MOSAIC,
CINEMA y WIDE(16:9) no funcionarán cuando la videocámara,
esta en modo PLAYER.
Pulsando el boton DSE hara" scroll" de los ajustes posibles.
Pare en el deseado.
Mantenimiento
Limpieza y cuidados de la Videocámara
Limpieza del Visor
Como desmontar el Ocular
1. Tire de VISOR hacia arriba y gire el tornillo
en sentido antihorario.
2. Saque el Ocular.
3. Limpie el Ocular y la pantalla del VISOR
con un paño suave, copo de algodón o un
soplador.
Colocación del Ocular
4. Ponga el Ocular en el VISOR.
5. Apriete el tornillo.
Limpieza del panel LCD
Abra el monitor LCD y limpie suavemente con un
paño suave. Tenga cuidado de no dañar el panel.
ESPAÑOL