Removing Excess Humidity - Samsung AQ09A6MAF/KCV Owner's Instructions Manual

Removing Excess Humidity

14
E-
If the atmosphere in your room is very humid or damp, you can
remove excess humidity without lowering the room temperature too
much.
1 If necessary, press the
◆ The 5 Way indicator on the indoor unit lights up.
Result:
◆ The air conditioner starts up in the mode selected when
the unit was last used.
◆ The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
It will start up normally after three minutes.
2 If the is not displayed at the top of the remote control, press the
button on the remote control one or more times until it appears.
◆ The indoor unit beeps each time you press the
Result:
◆ The air conditioner runs in DRY mode.
N N N N o o o o t t t t e e e e You can change modes at any time.
3 To adjust the temperature, press the
until the required temperature is displayed.
Possible temperatures are between 65°F(18°C) and 86°F(30°C)
inclusive.
◆ Each time you press the
Result:
- The temperature is adjusted by 1°F
- The indoor unit beeps
◆ The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
4 To control the direction of the air flow, refer to page 16 and 17.
(ON/OFF) button.
buttons one or more times
buttons:
button.