Connecting To Your Hifi / Audio Receiver Equipment (Analogue / Digital); Connecting Of A Video Projector To Your Receiver To Watch Digital Tv Programmes On A Video Projector - Philips DTR2000/00 Manual

- Plug your digital receiver into the mains.Turn it on using any remote control number button.Your
digital receiver will display the "WELCOME" screen (the left-hand LED will be illuminated green).
- Go to Quick installation to proceed with the channel scan.
Note:
1- This connection also applies if your VCR has two SCART sockets.
2- If you have a S-Video VCR, refer to chapter 7.2.2 for further settings and consult the User manual of your VCR.
3- With this connection set up, you can:
- Watch digital TV while you record analogue TV.
- Watch analogue TV while you record digital TV.
- Record the digital TV channel you are watching.
5.3 Connecting to your HiFi / Audio receiver equipment
(Analogue / Digital)
Depending on your HiFi / Audio receiver equipment, you might have several options to connect your
digital receiver.
Analogue connection
Connect the L/R audio output sockets to the relevant L/R audio input sockets of your audio
equipment using a double CINCH cable (not supplied). Consult the user manual of your HiFi/Audio
receiver equipment to choose the proper analogue audio inputs.
Note: With this connection set up you can control the audio volume up/down and mute using your digital
receiver or Hi-fi remote control.
Digital connection
Connect the audio "DIGITAL" output socket to the relevant digital audio input socket of your audio
equipment using a single CINCH cable (not supplied). Consult the user manual of your HiFi/Audio
receiver equipment to choose the proper digital audio input.
Note: With this connection set up you can only control the audio volume up/down and mute with your
HiFi/Audio receiver remote control, refer to the relevant User manual.
5.4 Connecting of a Video projector to your receiver to watch Digital
TV programmes on a video projector
Connect the "TV" SCART socket of your digital receiver, to your video projector.
Video projectors are often fed with S-Video format video signals. If this is the case with your
projector, follow the instructions below for connection and installation:
- Connect a SCART to the S-Video adapter between the TV SCART of your digital receiver and the
S-VIDEO input of your video projector.
- Installation: refer to chapter 7.2.2 to change the "TV/VCR output" setting of your digital receiver
to S-VIDEO/PAL-CVBS.
- Watch Play Back from your VCR.
- Continue to record analogue TV.
CONNECTING YOUR DIGITAL RECEIVER 15