Table of Contents
Advertisement
To enter notes, use the note's letter abbreviation (A to G, or R for
"Rest"), followed by # if the note is a sharp. To make the note an
octave higher or lower, put a + or a - directly after the note.
Unless you specify otherwise, each note is a quarter note which
sounds for one beat. To specify the length of the note, put a
number from 1 to 8 directly after the note's letter. The higher the
number, the longer the note will last.
When you finish editing the music tone, press
select
,
Quick Access Setup
This option allows you to do the following:
• Customize your Quick Access menu.
• Set up and change the Voice Tag allocation for the Quick
Access features.
For more information, see Voice Control for Quick Access
Features.
Phone Lock
This option is used to set, and change, the unlock code.
The unlock code can be set to protect your phone from
unauthorized use. It can be set to automatically lock your phone
each time it is switched on.
The unlock code is a four digit number which is set at
manufacture to 1234. This can be changed at any time by using
the 'change unlock code' option.
. You can then
, or
.
Automatic Lock
This option can be used to automatically lock your phone each
time it is switched on. The option has two settings,
Lock Now
This option can be used to immediately lock your phone. Once
selected, your phone will be unusable until the unlock code is
entered.
Change Unlock Code
This option is used to change the unlock code.
After selecting this option, you will be asked to enter the current
security code before you can proceed.
You can now enter a four digit code to replace the old code.
By pressing the
key, you can access this option even
when the phone is locked.
Adjust Contrast
This option is used to adjust the screen contrast.
The contrast is displayed as follows:
Adjust the contrast by pressing
Pressing
or
on the keypad will end the contrast
adjustment.
Using the Options Menu
or
.
or
on the keypad.
71
Advertisement
Table of Contents
