Kenwood R-K701 Instruction Manual page 31

RDS (Radio Data System)
3
Start the search.
Press the PTY key on the remote control unit.
÷ No sound is heard while the PTY indicator is blinking.
÷ If a program of the desired type cannot be found,
"No Program" blinks, then after several seconds the
display returns to the original display.
÷ If a program of the desired type is found, that program
is received and the program type name display
changes to the station name display.
÷ To cancel the search, press the PTY key again.
To change to a different program type :
Repeat steps 1, 2 and 3.
Display while searching for a Rock Music broadcast.
Program type name display.
PS display when an RDS station is received.
PS name display.
FM
Blinks.
1 2 3 4 5
RDS PTY
L
30 10 5 3 1 0 (-dB)
R
Goes off.
1 2 3 4 5
TUNED ST. AUTO RDS
L
30 10 5 3 1 0 (-dB)
R
MHz
31
EN