Specifications - Kenwood HM-636 Instruction Manual

Specifications

Main unit (RXD-M66)
[Amplifier section]
(For Europe)
Effective output power during STEREO operation
(1 kHz, 10% T.H.D., at 6 Ω) ................. 50 W + 50 W
Rated output power during STEREO operation
(1 kHz, 0.7% T.H.D., at 6 Ω) ................ 37 W + 37 W
(For other countries)
Rated output power during STEREO operation
(1 kHz, 10% T.H.D., at 6 Ω) ................. 50 W + 50 W
Frequency response
AUX ............................ 30 Hz~100 kHz (0 dB ~ -3dB)
[Tuner section]
FM tuner section
Tuning frequency range ......... 87.5 MHz ~ 108 MHz
MW (AM) tuner section
(For Europe)
Tuning frequency range .......... 531 kHz ~ 1,602 kHz
(For Australia)
Tuning frequency range .......... 531 kHz ~ 1,602 kHz
(For other countries)
Tuning frequency range
9 kHz step ............................ 531 kHz ~ 1,602 kHz
10 kHz step .......................... 530 kHz ~ 1,610 kHz
[CD player section]
Laser ....................................... Semiconductor laser
Over sampling ......................................... 8 fs (352.8 Hz)
Laser wave length .................................... 760 - 800 nm
Laser power class ................................... Class 3A (IEC)
D/A Conversion ....................................................... 1 Bit
[Cassette deck section]
Track ................................ 4-track, 2-channel stereo
Recording system ................................ AC bias system
Heads
Playback/ recording head ....................................... 1
Erasing head ............................................................. 1
Wow and flutter ................................ 0.2 % (W.R.M.S.)
48
EN
(Frequency: 105 kHz)
Fast winding time ....................... Approx. 100 seconds
[General]
Power consumption ............................................ 120 W
Dimensions ............................... W : 180 mm (7-1/16")
Weight (net) ........................................... 5.3 kg (11.7 lb)
Speakers (LS-M66)
Enclosure ............................................ Bass-reflex type
Speaker configuration
Woofer ...................................... 120 mm, cone type
Tweeter ..................................... 25 mm, dome type
Impedance ................................................................ 6 Ω
Maximum input level ............................................ 50 W
Dimensions ............................... W : 152 mm (6")
Weight (net) ............................... 2.7 kg (6.0 lb) (1 piece)
KENWOOD follows a policy of continuous ad-
vancements in development. For this reason
specifications may be changed without notice.
÷ Sufficient performance may not be exhibited
at extremely cold locations (where water
freezes).
For your records
Record the serial number, found on the back of the unit, in
the spaces designated on the warranty card, and in the
space provided below. Refer to the model and serial
numbers whenever you call upon your dealer for informa-
tion or service on this product.
Model
(C-60 tape)
H : 255 mm (8-7/16")
D : 335 mm (13-3/16")
H : 255 mm (10-1/16")
D : 213 mm (8-3/8")
Serial Number