Table of Contents
Advertisement
Menu settings
DSP
AUD
XOVER
DISP
NAME.S
DISP
#1-6
Menu display
LOUD indicator
RDS indicator
NEWS indicator
Menu System
You can set the defaults for additional functions in the menu
¢
mode. Make a setting for each function, referring to the
SRC
FM
following operations.
1
Enter the menu mode
Hold down the MENU button for one second or more.
"MENU" is displayed when the menu mode is entered.
The function that you can adjust is indicated with the current
3-D
DAB
PWR
OFF
settings displayed.
2
Selecting function to set
MENU
NF
Press the FM button to search through the functions until you
see the one you want to adjust in the display.
Press the AM button to search through the functions
backward.
4
Function items change in the order of features that follow in
MENU
AM
the menu system.
Example: If you want to switch the setting of the touch sensor
3
Changing setting for currently displayed function
Press either the 4 or ¢ button.
The setting will change for each function.
Example: The setting of the touch sensor tone will switch from
4
Ending the menu mode
Press the MENU button.
NOTE
Make sure to end the menu mode when finished.
If you fail to end the menu mode, several functions may not
operate properly, including the Traffic Information function, the
News Bulletin function with PTY news timeout setting, and the
Alarm function.
— 53 —
tone function from on to off, first search through the
functions until you see "Beep ON" in the display.
on to off, and "Beep OFF" is displayed.
Advertisement
Table of Contents
