Menu Settings; Menu System; Security Code - Kenwood KRC-509S Instruction Manual

Menu settings

LOUD B NR SCAN B.S/RDM REP
# 1-4
Menu display
38
FM MENU
PROG PROG PWR OFF
AUD
MTL/M.RDM AUTO DISP
AME NAME.S
4 ¢
AM
— 20 —

Menu System

You can set the defaults for additional functions in the menu
mode. Make a setting for each function, referring to the
following operations.
1
Enter the menu mode
Press the MENU button for at least one second.
"MENU" is displayed when the menu mode is entered.
The function that you can adjust is indicated with the current
settings displayed.
2
Selecting function to set
Press the FM button to search through the functions until you
see the one you want to adjust in the display.
Press the AM button to search through the functions
backward.
Function items change in the order of features that follow in
the menu system.
Example: If you want to switch the setting of the touch sensor
tone function from on to off, first search through the
functions until you see "Beep ON" in the display.
3
Changing setting for currently displayed function
Press either the 4 or ¢ button.
The setting will change for each function.
Example: The setting of the touch sensor tone will switch from
on to off, and "Beep
4
Ending the menu mode
Press the MENU button.
NOTE
Make sure to end the menu mode when finished.
If you fail to end the menu mode, several functions may not
operate properly, including the Traffic Information function and
the Alarm function.

Security Code

When the battery is removed from the unit's power switch,
you cannot turn on the unit again unless the preset security
OFF" is displayed.