Program Type (Pty) Function - Kenwood KDC-PS907 Instruction Manual

RBDS features
(See page 9)

Program Type (PTY) Function

Conduct auto seek tuning only on those stations with selected
kinds of programs.
To enter the program type selection mode:
1
Press the PTY button.
The PTY indicator lights up once the program type selection
mode is entered.
NOTE
You cannot use this function while the traffic information func-
tion is turned on.
2
Select the type of program to be received
• Press either the FM or AM buttons repeatedly to select the
type of program you want to listen to.
The selection includes:
Speech ↔ 1.News(NEWS) ↔ 2.Information(INFORM) ↔
3.Sports(SPORTS) ↔ 4.Talk(TALK) ↔ 5.Rock(ROCK) ↔
6.Classic Rock(CLS ROCK) ↔ 7.Adult Hits(ADLT HIT) ↔
8.Soft Rock(SOFT RCK) ↔ 9.Top 40(TOP 40) ↔
10.Country(COUNTRY) ↔ 11.Oldies(OLDIES) ↔
12.Soft(SOFT) ↔ 13.Nostalgia(NOSTALGA) ↔ 14.
Jazz(JAZZ) ↔ 15.Classical(CLASSICL) ↔ 16.R&B(R&B) ↔
17.Soft R&B(SOFT R&B) ↔ 18.Language(LANGUAGE) ↔
19.Religious Music(REL MUSC) ↔ 20.Religious Talk(REL
TALK) ↔ 21.Personality(PERSNLTY) ↔ 22.Public(PUBLIC)
↔ Music ↔ Speech ↔
(Speech.....1~4, 18, 20~22, Music.....5~17, 19)
• You can select the type of program directly by pressing a
preset button. The buttons are factory-set to the following
type of programs:
1. Music
4. Sports
NOTE
Changing the Preset Button Settings for Program Type
After selecting the type of program to be stored in a certain
preset button, hold down that button for at least two seconds.
The previously stored data for that button are erased and the
new program type is stored.
20
2. Speech 3. News
5. Classical 6. Jazz
3
Seeking the Selected Program Type
Press the 4 or ¢ button to make a seek of frequencies
with your selected type of program.
The display blinks and the seek starts.
If your selected type of program is found, the name or the
frequency of the station is displayed and the station is tuned
into.
The PTY indicator blinks in the display for about 30 seconds.
If you make no key input in 30 seconds, the PTY selection
mode will turn off automatically.
NOTE
If no program can be found, "NO PTY" is displayed.
If you want to select another type of program, repeat steps 2 and
3 above.
Switching to Other Stations with the Same Type of Program:
When the PTY indicator is blinking in the display, perform auto
seek tuning.
The tuner scans for another station with the same type of
program.
Canceling Program Type Function During Its Operation:
Press the PTY button.
To register a non-RBDS station as a program type:
1
Tune your radio to the non-RBDS station that you want to
register as the program type.
2
Press the PTY button to enter the program type selection
mode.
3
Press the FM/AM button to select the program type you want
to register. Follow the instructions in 2 to enter the program
type selection mode.
4
Press the CLK button for at least two seconds.
The station will be registered as a program type, allowing it to
be the target of frequency seeks just as RBDS stations are.
NOTE
You can store up to 32 stations.
If you try to store a 33rd station, the frequency and program type