Table of Contents
Advertisement
RDS features
Program Type preset
Putting the Program Type in the Preset button memory and
calling it up quickly.
Presetting the Program Type
1
Select the Program Type to preset
Refer to <PTY(Program Type)> (page 11).
2
Preset the Program Type
Press the [#1] — [#6] button for at least 2 seconds.
Calling up the preset Program Type
1
Enter PTY mode
Refer to <PTY(Program Type)> (page 11).
2
Call up the Program Type
Press the [#1] — [#6] button.
Changing Language for PTY Function
Selecting the Program Type display language.
1
Enter PTY mode
Refer to <PTY (Program Type)> (page 11).
2
Enter Changing Language mode
Press the [CLK] button.
3
Select the language
Press the [#1] — [#3] button.
Button
[#1]
[#2]
[#3]
4
Exit Changing Language mode
Press the [CLK] button.
Language
English
French
German
Traffic Information
Switching to traffic information automatically when a traffic
bulletin starts even when you aren't listening to the radio.
Press the [TI] button.
Each time the button is pressed the Traffic Information function
turns ON or OFF.
When it's ON, "TI" indicator is ON.
When a traffic information station isn't being received the "TI"
indicator blinks.
When a traffic bulletin starts, "TRAFFIC" is displayed it and it
switches to traffic information.
• During reception of a AM station when the Traffic Information
function is turned ON, it switches to a FM station.
• During reception of traffic information the adjusted volume is
automatically remembered, and the next time it switches to traffic
information it's automatically the remembered volume.
Receiving other traffic information stations
Press the [4] or [¢] button.
Traffic information station switching can be done when listening to
the radio.
Presetting Volume for Traffic Information
Setting the volume during Traffic Information.
1
Receive the station.
2
Set the volume you want.
3
Preset the volume
Press the [VOL ADJ] button for at least 2 seconds.
The volume level display blinks 1 time.
— 12 —
Advertisement
Table of Contents
