Cassette Player Features; Playing Cassette Tapes - Kenwood DPX-4020 Instruction Manual

Cassette player features

¢
4
FM
AM
B NR B.S
SCN
REP indicator B.S indicator
B NR indicator
OPEN
DISP
SRC
38
METAL
REP
SCN indicator MTL indicator
Tape counter
indicator

Playing Cassette Tapes

Loading and Playing Cassettes:
A press of the OPEN button results in the faceplate dropping
open to the front, thereby exposing the cassette insertion slot.
Holding the cassette with the tape exposed to the right, insert
it in the slot. The tape will start playing.
Push back on the right side of the faceplate with your hand
until it locks.
The indicator lights up when a cassette has been loaded.
2CAUTION
When inserting a cassette make sure the cassette has been
completely drawn in before pushing back the faceplate. Failing to
do so might deform the tape.
0 button
Playing Cassettes Already Loaded:
Press the SRC (Source) button repeatedly to select the tape
mode.
"TAPE" is displayed when the tape mode has been selected.
The tape will start playing.
Listening to the other side:
Press the 38 button.
Tape play switches to the other side.
Ejecting Cassettes:
Press the OPEN button and drop open the faceplate.
Press the 0 button located near the cassette insertion slot.
The tape stops playing and the cassette ejects.
Push back on the right side of the faceplate with your hand
until it locks.
2CAUTION
• When the faceplate has been dropped open, it might interfere
— 14 —