Advertisement
Troubleshooting Guide
WARNING: Unplug cord from
electrical outlet before servicing.
SAVE SERVICE CALLS...CHECK THESE FIRST:
• Is the disposable filter dust bag full?
• Are pores of filter dust bag clogged with powder or fine dust?
• Is anything clogging the revolving brush, lower tube, intake
opening, fan housing or connector assembly opening?
• Is the belt in place and turning the brush?
• Are the brush ends in the proper location?
• Does the brush turn freely? Are hair, string or rug fibers wound
around the brush?
P
ROBLEM
C
LEANER
WILL NOT RUN
C
LEANER
DOES NOT PICK UP
ALL OTHER SERVICING SHOULD BE DONE BY AN
ORECK AUTHORIZED SERVICE CENTER.
CALL CUSTOMER SERVICE HOT LINE
0845 603 0153
Whenever calling, please be sure to have your model and
serial number from data plate.
©2005 Oreck Holdings, LLC. All rights reserved. All word marks, logos, product configurations, and registered trademarks
are owned and used under the authority of Oreck Holdings, LLC. Printed in America.
P
S
A
OSSIBLE
OURCE
REAS TO
Not plugged in
Be sure cleaner is
properly.
firmly plugged
into wall outlet.
No electricity in
Check electrical
wall outlet.
source–fuse or
circuit breaker.
Filter bag is full.
Replace filter bag.
See "To Replace
Paper Filter Dust
Bag."
Nozzle or intake
Clear obstruction.
pivot clogged.
Belt is broken or
Replace belt.
stretched.
Brush is worn.
See "To Adjust or
Replace Brush."
Bag tube clogged.
Clear obstruction.
Bag pores are
Change bag.
clogged with fine
dust.
Impeller fan is
Return to Service
broken.
Center for repair.
Revolving brush is
Check brush roll
not even at both
end cards. Make
ends.
sure words "OLD"
or "NEW" match
at each end.
C
HECK
8
75691-03 REV A
10/06 ECN# R-8360
Advertisement
