Related Manuals for Oreck XL 2635RH
Summary of Contents for Oreck XL 2635RH
- Page 1 S I M P L Y A M A Z I N G ® ’ UIDE 2635RH HIGH SPEED UPRIGHT VACUUM CLEANER WITH ® CLEANING SYSTEM •IMPORTANT• SAVE THIS BOOKLET! Includes: • Safety Warnings • Warranty • Operating Instructions • Trouble Diagnosis •...
-
Page 2: Table Of Contents
• Do not pull or carry by cord, use cord as a handle, close door on Stuffing or Blockage, Bulb Replacement cord, or pull cord around sharp edges or corners. Keep cord Using an Oreck Fresh Air ® Tab ..page 7 away from heated surfaces. -
Page 3: Maintenance And Customer Service, Warranty, And Accessories
Oreck or an Oreck Authorized Retail Dealer.) Oreck will repair or replace, free of charge, to the original purchaser, any part that is found to be defective in material or workmanship within three (3) years of date of purchase;... -
Page 4: Assembly
To Replace Filter Assembly Assembly Dust Bag To assist you in identifying WARNING: Unplug cord from components of your vacuum, electrical outlet before servicing. the parts have been numbered BAG REMOVAL: as follows: 1 Handle tube, upper 1. Unsnap bag door from 2 Tube, lower base. -
Page 5: Operating Instructions
Operating Recommendations buying replacement belts, use ONLY ORECK genuine belts. This new ORECK XL High-Speed Upright is one of the finest, Belts other than ORECK belts will not operate the revolving fastest, and strongest units in its class. You’ll love the way it brush correctly and may create undue stress which will cause cleans, gets under things, and it’s SO lightweight and easy to... -
Page 6: How To Replace A Worn Belt, To Adjust Or Replace Brush
ow to eplace a djust or eplace rush WARNING: Unplug cord from WARNING: Unplug cord from electrical outlet before servicing. electrical outlet before servicing. Remove the replacement To determine if the brush is belt from the storage worn, place a firm straight channel. -
Page 7: Using An Oreck Fresh Air
If there is blockage, remove NOTE: If the “Stuffing or Blockage” actions do not correct the it with long-nose pliers, a problem, contact an ORECK authorized service center or call the screwdriver or coat hanger. customer service center at: 0845 603 0153. -
Page 8: Troubleshooting Guide
75691-03 REV A ©2005 Oreck Holdings, LLC. All rights reserved. All word marks, logos, product configurations, and registered trademarks 10/06 ECN# R-8360 are owned and used under the authority of Oreck Holdings, LLC. Printed in America.