NOTE: Please keep the user manual as it contains important
information.
Unlock the packaging locks:
REMOVE DEMO TAG
The demo tag should come off automatically when the product is taken
out of the packaging. If the demo tag is still in place when you begin
play, please remove it from the bottom of the unit to activate normal
play mode.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is off.
2. Locate the battery cover at the bottom
of the unit. Use a coin or screwdriver
to loosen the screw.
3. Install three new "AA"(AM-3/LR6)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten
the screw to secure.
Rotate the packaging locks 90
degrees counter-clockwise.
Pull out the packaging locks.