Intercom Features Between The Handset And Base Unit (Kx-Tgp550 Only) - Panasonic KX-TGP550 T04 User Manual

Intercom Features
Note:
L If the other handset user does not answer the
call within 1 minute, the call rings at your
handset again.
Answering a transferred call
Press {C} to answer the page.
Note:
L After the paging party disconnects, you can talk
to the outside caller.
Intercom features between
the handset and base unit
(KX-TGP550 only)
Intercom
Intercom calls can be made between the handset
and base unit.
Note:
L If you receive an outside call while talking on the
intercom, you hear interrupt tones (page 28, 34).
– To answer the call with the handset, press
{OFF}, then press {C}.
– To answer the call with the base unit, place
the corded handset on the cradle, then lift it
again. If the speakerphone is used, press
{SP-PHONE} 2 times.
L When paging the handset, the paged handset
beeps for 1 minute.
Making an intercom call
Y Handset
1
{MENU} (center of joystick)
2
{V}/{^}: "Intercom" i {SELECT}
3
{V}/{^}: Select the desired unit. i {CALL}
L To stop paging, press {OFF}.
4
When you finish talking, press {OFF}.
: Base unit
1
Press {j} – {k} or {ALL}.
L Lift the corded handset if needed.
L To stop paging, press the same button.
2
When you finish talking, press {SP-PHONE}
or place the corded handset on the cradle.
46
Answering an intercom call
Y Handset
1
Press {C} to answer the page.
2
When you finish talking, press {OFF}.
: Base unit
1
Lift the corded handset or press {SP-PHONE}
to answer the page.
2
When you finish talking, place the corded
handset on the cradle or press {SP-PHONE}.
Answering an intercom call using auto
intercom
Before using the auto intercom, turn auto intercom
on (page 45).
Y Handset
1
When you are paged by the base unit, speak
into the microphone.
L To switch to the receiver, press {C}.
2
To end the intercom, press {OFF}.
Monitoring audio in a room using auto
intercom
You can listen to the sound in a room where the
handset is located using the auto intercom.
Important:
L Before using this feature, set auto intercom on
the destination handset to "On (Ringer
Off)" to allow access by the base unit.
: Base unit
1
Call the destination handset (page 46).
L You can listen to the audio.
2
To mute your sound output, press {MUTE} if
necessary.
3
To stop monitoring, press {SP-PHONE} or
place the corded handset on the cradle.
Document Version 2012-01