Dell PowerEdge C6220 Hardware Owner's Manual page 87

Token Setup option
I/OAT DMA
01D0
Engine
01DA Embedded NIC1 Enables NIC1 with iSCSI Remote Boot.
01DB Embedded NIC2 Enables NIC2 with iSCSI Remote Boot.
01EA Turbo Mode
01EB Turbo Mode
01F0 Embedded NIC3 Disables the system's third embedded network interface
Embedded NIC3 Enables the system's third embedded network interface
01F1
Embedded NIC3 Enables the system's third embedded network interface
01F2
01F3 Embedded NIC3 Enables NIC3 with iSCSI Remote Boot.
VT for Direct I/O Disables Intel Virtualization Technology for Direct I/O
0204
VT for Direct I/O Enables Intel Virtualization Technology for Direct I/O
0205
Internal USB
0211
PORT
Internal USB
0212
PORT
Maximum
021F
Performance
0221 OS Control
Embedded
0224
Video Controller
Description
Disables the I/O Acceleration Technology (I/OAT) DMA
Engine option. This feature should be disabled only if the
hardware and software support I/OAT.
Disables Intel's CPU allows the processor core to increase
its frequency.
Enables Intel's CPU allows the processor core to increase
its frequency.
controller.
controller, but don't enable the NIC's associated PXE or
RPL boot-ROM.
controller (full-function), including its PXE boot-ROM.
(VT-d) that enhances I/O support (DMA) when running a
Virtual Machine Monitor.
(VT-d) that enhances I/O support (DMA) when running
a Virtual Machine Monitor.
This field disables the internal USB port.
This field enables the internal USB port.
This will set the Maximum Performance mode in the
system.
Allows OS to change the P-state.
The embedded video controller is enabled, and it is the
primary video device.
Installing System Components | 87