Installing The Expansion-Card Connector For 1U Node - Dell PowerEdge C6220 Hardware Owner's Manual

Figure 3-34. Removing and Installing the Expansion-Card Connector
1 screw (2)
3 expansion-card bracket

Installing the Expansion-Card Connector for 1U Node

CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
1 Place the expansion-card connector into the expansion-card bracket.
See Figure 3-34.
2 Replace the two screws securing the expansion-card connector to the
expansion-card bracket. See Figure 3-34.
3
Install the expansion card. See "Installing the Expansion Card for 1U
Node" on page 138.
4 Replace the system-board assembly. See "Installing a System-Board
Assembly" on page 125.
164 | Installing System Components
2 expansion-card connector